Sheet in PA6 C OL 3000x1220x40 mm yellow

This is a sheet made of PA6 C OL, oil filled cast polyamide 6 with the oil built into the material.

The material is semi-crystalline and has a melting point of 217 °C.

The density is 1.15 g/cm³ and the moisture absorption at 23 degrees and 50 percent relative humidity is 1.9 percent.

The yield strength is 75 MPa, the elongation at break 45 percent and the tensile modulus 3050 MPa.

The sliding friction against steel is about 0.15 dry, compared with 0.36 for unfilled cast PA6.

The continuous service temperature is 108 °C, 160 °C for short periods and the lowest working temperature -40 °C. The fire rating is HB.

Used for bearing bushings, slide strips, chain guides, wear rails and other sliding surfaces that have to run dry without regular relubrication.

The plastic can be sawn, milled, turned and drilled with tools intended for engineering plastics. When milling, sharp inserts give a cleaner surface. Moisture affects the dimensions, so let the material rest in the workshop climate before final sizing.

This particular sheet in PA6 C OL measuring 3000 x 1220 x 40 mm in the color yellow suits dry sliding surfaces such as bearing bushings, slide strips and wear rails without regular lubrication. Cut to size on request.

Not sure whether the material suits your case? Get in touch with us.