Hollow Bar in PA6 E GF30 125/80x1000 mm black

This is a hollow bar made of PA6 E GF30, glass fiber reinforced extruded polyamide 6 with 30 percent glass fiber.

The material is semi-crystalline and has a melting point of 219 °C.

The density is 1.35 g/cm³ and the moisture absorption at 23 degrees and 50 percent relative humidity is 2.1 percent.

The tensile strength is 98 MPa, the tensile modulus 5700 MPa and HDT/A 210 °C.

The elongation at break is 5 percent and Shore D 84. The fire rating is HB.

Used where dimensional stability in heat weighs more than toughness, for example fixture plates, holders, spacers, wear surfaces and precision parts.

The tube can be sawn, milled, drilled and turned with tools meant for engineering plastics. When fitting bearing bushings and the like it is important to compensate for the moisture uptake so the dimensions hold after assembly.

This particular hollow bar in PA6 E GF30 measuring 125 x 80 x 1000 mm in the color black suits stiff structural parts such as fixtures, holders, spacers and wear surfaces under load.

The 125 x 80 x 1000 mm format in PA6 E GF30 makes it suitable for applications where you need a specific size without large machining margins.

The black color on this PA6 E GF30 hollow bar makes it easy to identify in production and lowers the risk of mixing it up with something else.

Not sure whether the material suits your case? Get in touch with us.