Skip to Content
Menu
Log in Quotation cart Cart Contact Blog
    1. All Products
    2. All Products
    3. Round Rod in PI HT 21x250 mm yellow
    Standard
    Round Rod in PI HT 21x250 mm yellow
    Round Rod in PI HT 21x250 mm yellow
    PI round bar

    Round Rod in PI HT 21x250 mm yellow

    Item no. P3048049 0.1 kg
    Tillgängligt från lager
    • Outer diameter

    The selected combination does not exist.

    PI, that is polyimide, is the most heat resistant plastic we sell. HT stands for high temperature version, and the yellow HT grade is dimensionally stable up to 470 degrees, which is the highest figure in the whole range.

    Polyimide is amorphous and has no melting point. The HT grade has almost no moisture uptake at all, only 0.08 percent when immersed in room temperature water. It has an oxygen index of 53 percent, far above the 21 of air, and matches fire rating UL 94 V-0.

    The price for the extremely high dimensional stability is toughness: the notched impact strength is only 1.1 kJ/m², the lowest in the category. Where the temperature is the problem and the part can sit dry, the HT grade is hard to beat.

    You get the polyimide round rod in PI HT, yellow, 250 mm, suitable for turned components where standard plastics are not enough.

    Request a quote with your exact dimensions and volume.

    Technical specifications

    Färggrupp
    Gul
    Nyans
    Gul
    Format
    Rundstång
    Material
    PI HT
    Length
    250 mm
    Outer Diameter
    6 mm
    Benefits
    Chemical Resistant

    God motståndskraft mot kemikalier, syror och baser

    High Temperature Resistant

    Behåller mekaniska egenskaper vid höga temperaturer

    Low Friction

    Låg friktionskoefficient, självsmörjande egenskaper

    Machining
    CNC Machining

    Datorstödd bearbetning

    Drilling

    Håltagning med borr

    Milling

    Bearbetning med fräs

    Sawing

    Kapning med såg (band-, cirkelsåg)

    Turning

    Bearbetning i svarv

    Property Value Unit Test standard
    Density & Weight
    Density 1,47 g/cm³ ISO 1183
    Tensile Properties
    Yield Stress 100 MPa ISO 527-2
    Tensile Modulus of Elasticity 6100 MPa ISO 527-2
    Tensile Strain at Break 1,7 % ISO 527-2
    Flexural Properties
    Flexural Strength 160 MPa ISO 178
    Flexural Modulus of Elasticity 6100 MPa ISO 178
    Impact Resistance
    Charpy Notched Impact Strength 1,1 kJ/m² ISO 179
    Charpy Unnotched Impact Strength 20 kJ/m² ISO 179
    Hardness
    Shore D Hardness 90 Shore D Shore D
    Ball Indentation Hardness 345 MPa ISO 2039-1
    Compressive Properties
    Compressive Strength 210 MPa ISO 604
    Compressive Modulus 6193 MPa ISO 604
    Temperature Limits
    Max. Continuous Service Temperature 290 °C
    Heat Deflection Temperature (HDT/A) 335 °C ISO 75
    Thermal Conductivity
    Thermal Conductivity 0,52 W/(m·K) DIN 52612
    Thermal Expansion
    Coefficient of Linear Thermal Expansion 3,6 x 10⁻⁵ ISO 11359-2
    Insulation Properties
    Dielectric Strength 22,7 kV/mm IEC 60243-1
    Static Dissipation
    Surface Resistivity 10¹⁶ IEC 60093
    Flammability Rating
    Flammability Rating (UL 94) UL 94 V-0, motsvarande UL 94
    Limiting Oxygen Index (LOI) 53 % ISO 4589-2

    Värdena ovan är genomsnitt från statistiska tester som görs löpande. De anges som information och är inte bindande, om inte annat uttryckligen avtalats i ordererkännandet. För batchspecifika värden kan PlastShop tillhandahålla ett EN 10204-2.2-certifikat.

    Download the technical data sheet (PDF)