Sheet in PP-H AlphaPlus PB 3000x1500 mm gray

PP-H AlphaPlus is a nucleated polypropylene homopolymer. AlphaPlus means with an alpha nucleator, an additive that gives a more even crystal structure and better dimensional stability. The material is stiffer than standard PP-H and takes 20 degrees more heat.

The density is 0.91 g/cm³, the tensile modulus 1700 MPa and the yield strength 33 MPa. The elongation at yield is 8 percent and the notched Charpy impact strength 9 kJ/m². Shore D is 72. The temperature range is 0 to +120 °C in short term testing.

The building fire class is B2 and the material is approved for direct food contact. The surface resistivity is very high.

AlphaPlus suits structural parts where stiffness and dimensional stability under load matter more than maximum impact strength. The material is machined like ordinary PP-H.

Thanks to the more even crystal structure the sheets warp less during sawing and milling. Weld with hot air or a welding rod as for standard PP.

The back is reinforced with a polyester backing (PB). The values in the text apply to the base sheet without the backing.

This sheet in PP-H AlphaPlus PB with polyester backing is gray and measures 3000x1500 mm, which suits cutting boards, linings, splash guards and machine guards. With the dimensions 3000x1500 mm and the surface in gray you get a sheet in PP-H AlphaPlus PB with polyester backing that is particularly well suited to large workpieces that are to be cut to size. Do you want this sheet in PP-H AlphaPlus PB with polyester backing with the dimensions 3000x1500 mm and the surface in gray cut or trimmed to your measurements? Add CTS to the cart.

Do you want it cut to size? Add CTS to the cart.