Roll in PP-H AlphaPlus PB gray

PP-H AlphaPlus is a nucleated polypropylene homopolymer. AlphaPlus means with an alpha nucleator, an additive that gives a more even crystal structure and better dimensional stability. The material is stiffer than standard PP-H and takes 20 degrees more heat.

The density is 0.91 g/cm³, the tensile modulus 1700 MPa and the yield strength 33 MPa. The elongation at yield is 8 percent and the notched Charpy impact strength 9 kJ/m². Shore D is 72. The temperature range is 0 to +120 °C in short term testing.

The building fire class is B2 and the material is approved for direct food contact. The surface resistivity is very high.

AlphaPlus suits structural parts where stiffness and dimensional stability under load matter more than maximum impact strength. The material is machined like ordinary PP-H.

Thanks to the more even crystal structure the sheets warp less during sawing and milling. Weld with hot air or a welding rod as for standard PP.

The back is reinforced with a polyester backing (PB). The values in the text apply to the base sheet without the backing.

This roll in PP-H AlphaPlus PB with polyester backing is AlphaPlus PB gray and is supplied in a standard format, which suits large linings, guards, covering surfaces and membranes. This roll in PP-H AlphaPlus PB with polyester backing in AlphaPlus PB gray is particularly well suited to large surfaces that are to be cut as you wish. Contact us if you want this roll in PP-H AlphaPlus PB with polyester backing in AlphaPlus PB gray adapted to your needs.

Not sure whether the material suits your case? Get in touch with us.