Skip to Content
Menu
Log in Quotation cart Cart Contact Blog
    1. All Products
    2. All Products
    3. Round Rod in PI 1000 mm yellow
    Standard
    Round Rod in PI 1000 mm yellow
    Round Rod in PI 1000 mm yellow
    PI round bar

    Round Rod in PI 1000 mm yellow

    Beställningsvara
    • Outer diameter

    The selected combination does not exist.

    Variants

    Item no.
    Loading variants ...

    PI, that is polyimide, is the most heat resistant plastic we sell. The yellow grade is the driest of the unfilled grades: it takes up about a third as much moisture as the brown one.

    Polyimide is amorphous and therefore has no melting point. The yellow grade is dimensionally stable up to 360 degrees and has a tensile strength of 130 MPa. Nor does it burn: it has an oxygen index of 49 percent, far above the 21 of air, and matches fire rating UL 94 V-0.

    The weakness is hydrolysis, that is hot water and steam, which PI is sensitive to in the upper temperature range. But dry and hot is where the yellow grade is at its best, in ovens, dryers and electronics that run warm.

    You get the polyimide round rod in PI, yellow, 1000 mm, suitable for turned components where standard plastics are not enough.

    Not sure whether the material suits your case? Get in touch with us.

    Technical specifications

    Färggrupp
    Gul
    Nyans
    Gul
    Format
    Rundstång
    Material
    PI
    Length
    1000 mm
    Outer Diameter
    16 mm
    Benefits
    Chemical Resistant

    God motståndskraft mot kemikalier, syror och baser

    High Temperature Resistant

    Behåller mekaniska egenskaper vid höga temperaturer

    Low Friction

    Låg friktionskoefficient, självsmörjande egenskaper

    Machining
    CNC Machining

    Datorstödd bearbetning

    Drilling

    Håltagning med borr

    Milling

    Bearbetning med fräs

    Sawing

    Kapning med såg (band-, cirkelsåg)

    Turning

    Bearbetning i svarv

    Property Value Unit Test standard
    Density & Weight
    Density 1,42 g/cm³ ISO 1183
    Tensile Properties
    Yield Stress 130 MPa ISO 527-2
    Tensile Modulus of Elasticity 4300 MPa ISO 527-2
    Tensile Strain at Break 6,5 % ISO 527-2
    Flexural Properties
    Flexural Strength 180 MPa ISO 178
    Flexural Modulus of Elasticity 4000 MPa ISO 178
    Impact Resistance
    Charpy Notched Impact Strength 9,6 kJ/m² ISO 179
    Charpy Unnotched Impact Strength 87 kJ/m² ISO 179
    Hardness
    Shore D Hardness 88 Shore D Shore D
    Ball Indentation Hardness 265 MPa ISO 2039-1
    Compressive Properties
    Compressive Strength 185 MPa ISO 604
    Compressive Modulus 4123 MPa ISO 604
    Temperature Limits
    Max. Continuous Service Temperature 290 °C
    Heat Deflection Temperature (HDT/A) 335 °C ISO 75
    Glass Transition Temperature 260 °C ISO 3146
    Thermal Conductivity
    Thermal Conductivity 0,4 W/(m·K) DIN 52612
    Thermal Expansion
    Coefficient of Linear Thermal Expansion 4,6 x 10⁻⁵ ISO 11359-2
    Insulation Properties
    Dielectric Strength 18 kV/mm IEC 60243-1
    Static Dissipation
    Surface Resistivity 10¹⁶ IEC 60093
    Flammability Rating
    Flammability Rating (UL 94) UL 94 V-0, motsvarande UL 94
    Limiting Oxygen Index (LOI) 49 % ISO 4589-2

    Värdena ovan är genomsnitt från statistiska tester som görs löpande. De anges som information och är inte bindande, om inte annat uttryckligen avtalats i ordererkännandet. För batchspecifika värden kan PlastShop tillhandahålla ett EN 10204-2.2-certifikat.

    Download the technical data sheet (PDF)