Round Rod in PP HT 3048 mm white

PP HT is a heat stabilized polypropylene homopolymer. HT stands for High Temperature, but in this case it means heat stabilized, not that the material takes a higher service temperature. The maximum service temperature is still 100 °C continuous, the same as ordinary PP-H.

The density is 0.92 g/cm³. The modulus is 2000 MPa in both tension and bending, and the flexural strength 56 MPa. HDT/A is 87 °C, which is the only temperature related figure that differs from PP-H. The melting point is 161 °C and the maximum service temperature for short periods 140 °C.

The ball indentation hardness is 100 MPa, the glass transition temperature -10 °C and the water absorption 0.01 percent. The fire rating is UL 94 HB. The material is biocompatible and comes in black and white.

PP HT is used for medical device parts, sterilization baskets, laboratory equipment and components exposed to repeated heat cycles. It is machined with saw, mill and drill and welded with hot air.

This round rod in PP HT is white and measures 3048 mm, which suits turned parts, rollers, slide rings and shaft studs. With the 3048 mm dimension and the white surface you get a round rod in PP HT that is particularly well suited to longer machining jobs where turning or milling is required. Contact us if you want this round rod in PP HT with the 3048 mm dimension and the white surface adapted to your needs.

Request a quote with your exact dimensions and volume.