Film in APET 1450x1050x0.4 mm transparent anti-reflective 85%
APET is amorphous polyester, a crystal clear and stiff film used for signs and displays. Amorphous means that the material has no melting point but softens gradually. The film is tough and hard to break, with an impact strength above 250 kJ/m2, and it takes pressure and punching without cracking. The tensile strength is above 45 MPa and the density is 1.33. The material is approved for direct contact with food, and the surface is pretreated so that printing ink takes hold, with a surface tension above 38 dyn/cm.
This film is an anti-reflective film in APET, 1450 x 1050 mm and 0.4 mm thick, in a transparent version. The anti-reflective treatment damps reflections so that what lies underneath is clearly visible even against the light, and the film lets through 85 percent of the light. It suits display cases, picture glass and displays where reflections would otherwise get in the way. If you want the film cut to size, add CTS to the cart.
Technical specifications
| Property | Value | Unit | Test standard |
|---|---|---|---|
| Density & Weight | |||
| Density | 1,33 | g/cm³ | ISO 1183 |
| Moisture Absorption | |||
| Moisture absorption (23°C/50% RH) | 0,2 | Procent | Plast - Bestämning av vattenabsorption |
| Water Absorption to Saturation | 0,5 | % | ISO 62 |
| Tensile Properties | |||
| Yield Stress | > 45 | MPa | ISO 527-2 |
| Tensile Modulus of Elasticity | 2500 | MPa | ISO 527-2 |
| Strain at Yield | 4 | % | ISO 527-2 |
| Tensile Strain at Break | > 25 | % | ISO 527-2 |
| Flexural Properties | |||
| Flexural Strength | 80 | MPa | ISO 178 |
| Impact Resistance | |||
| Charpy Notched Impact Strength | > 250 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength | brister inte | kJ/m² | ISO 179 |
| Temperature Limits | |||
| Max. Continuous Service Temperature | 60 | °C | |
| Heat Deflection Temperature (HDT/A) | 63 | °C | ISO 75 |
| Vicat Softening Temperature (VST/B/50) | 71 | °C | ISO 306 |
| Thermal Conductivity | |||
| Thermal Conductivity | 0,25 | W/(m·K) | DIN 52612 |
| Thermal Expansion | |||
| Coefficient of Linear Thermal Expansion | 50 x 10⁻⁶ | ISO 11359-2 | |
| Insulation Properties | |||
| Dielectric Strength | 17 | kV/mm | IEC 60243-1 |
| Volume Resistivity | > 10¹⁵ | IEC 60093 | |
| Dielectric Constant (1 MHz) | 3,1 | IEC 60250 | |
| Dielectric Dissipation Factor (1 MHz) | 0,056 | IEC 60250 | |
| Static Dissipation | |||
| Surface Resistivity | > 10¹⁶ | IEC 60093 | |
| Flammability Rating | |||
| Fire Classification Building (DIN 4102/EN 13501) | B-s1,d0 enligt EN 13501, B1 enligt DIN 4102 | ||
Värdena ovan är genomsnitt från statistiska tester som görs löpande. De anges som information och är inte bindande, om inte annat uttryckligen avtalats i ordererkännandet. För batchspecifika värden kan PlastShop tillhandahålla ett EN 10204-2.2-certifikat.
| Chemical | Concentration | Resistance |
|---|---|---|
| 1,4-Dioxan | 100 | |
| 1,4-Dioxan | 100 | |
| Aceton | 100 | |
| Aceton | 100 | |
| Ammoniak | conc. | |
| Ammoniak | conc. | |
| Ammoniumklorid | - | |
| Ammoniumklorid | - | |
| Amylalkohol | - | |
| Amylalkohol | - | |
| Bensen | - | |
| Bensen | - | |
| Bensin | - | |
| Bleklösning | 12,5 cl | |
| Bleklösning | 12,5 cl | |
| Bläck | - | |
| Borsyra | 100 | |
| Borsyra | 100 | |
| Brandy | - | |
| Bromsvätska | - | |
| Bromsvätska | - | |
| Bränsle, aromatfritt | - | |
| Bränsle, aromatfritt | - | |
| Butylacetat | - | |
| Butylacetat | - | |
| Butylenglykol | - | |
| Citronsyra | 10 | |
| Citronsyra | 10 | |
| Clophen A60 | 50 | |
| Cyklohexan | - | |
| Cyklohexanon | 100 | |
| Cyklohexanon | 100 | |
| Cyklohexen | 100 | |
| Cyklohexen | 100 | |
| Dekalin | - | |
| Dieselbränsle | - | |
| Dieselbränsle | - | |
| Dietylenoxid | - | |
| Dietylenoxid | - | |
| Dietyleter | - | |
| Dimetylformamid | - | |
| Dioktylftalat | - | |
| Eldningsolja | - | |
| Eldningsolja | - | |
| Etanol | 96 | |
| Etanol | 96 | |
| Etylacetat | 100 | |
| Etylacetat | 100 | |
| Etylenklorid | 100 | |
| Etylenklorid | 100 | |
| Fenol, vattenlösning | ca. 9 | |
| Fenol, vattenlösning | ca. 9 | |
| Fluorvätesyra | 40 | |
| Fluorvätesyra | 40 | |
| Formaldehyd, vattenlösning | 40 | |
| Formaldehyd, vattenlösning | 40 | |
| Fosforsyra | 50 | |
| Fosforsyra | 50 | |
| Freon (diklordifluormetan) | - | |
| Frostskyddsmedel | - | |
| Frostskyddsmedel | - | |
| Fruktjuicer | - | |
| Glycerin | 100 | |
| Glycerin | 100 | |
| Glykol | 100 | |
| Glykol | 100 | |
| Glykolsyra | - | |
| Glysantin | 40 | |
| Heptan | 100 | |
| Heptan | 100 | |
| Heptan och hexan | - | |
| Isooktan | - | |
| Isopropanol | - | |
| Isopropylalkohol | 100 | |
| Isopropylalkohol | 100 | |
| Kalciumklorid | - | |
| Kalciumklorid | - | |
| Kaliumhydroxidlösning | 50 | |
| Kaliumhydroxidlösning | 50 | |
| Kaliumpermanganat | 1 | |
| Klor, gas | 100 | |
| Klor, gas | 100 | |
| Klorbensen | 100 | |
| Klorbensen | 100 | |
| Kloroform | - | |
| Kloroform | - | |
| Koldisulfid | 100 | |
| Koldisulfid | 100 | |
| Koltetraklorid | - | |
| Koltetraklorid | - | |
| Kopparsulfat | 10 | |
| Kresol | - | |
| Kresol | - | |
| Linolja | - | |
| Linolja | - | |
| Matolja | - | |
| Matolja | - | |
| Merkurokrom | - | |
| Merkurokrom | - | |
| Metanol | 100 |
Värdena ovan är genomsnitt från statistiska tester som görs löpande. De anges som information och är inte bindande, om inte annat uttryckligen avtalats i ordererkännandet. För batchspecifika värden kan PlastShop tillhandahålla ett EN 10204-2.2-certifikat.
Showing 100 of 199 chemicals. Download the complete list (PDF)
Documents available for download: