Sheet in PE Bulk MoS² 3000x1250 mm gray

PE Bulk MoS² is ultra high molecular weight polyethylene with molybdenum disulfide added, a dry lubricant. It gives the lowest friction in the PE family and suits sliding surfaces that must not be lubricated. MoS² is a solid lubricating particle that stays in the surface even under pressure.

The density is 0.95 g/cm³, the modulus 650 MPa and the yield strength above 17 MPa. The elongation at break is above 300 percent and the dynamic coefficient of friction 0.08. The abrasion according to Sand-Slurry is 80 and the ball indentation hardness 34 MPa.

The melting point is 135 °C and the maximum service temperature 80 °C. The material takes temperatures down to -200 °C. The water absorption is 0.01 percent and the surface and volume resistivity above 10¹². The molecular weight is 9 x 10⁶ g/mol and the fire rating UL 94 HB.

PE Bulk MoS² is used for bearing tracks, slide rails, guide rails and other surfaces where low friction without oil is decisive.

PE Bulk MoS² is used for bearing tracks, slide rails, guide rails and other surfaces where low friction without oil is decisive. The molybdenum disulfide works as a dry lubricant and stays in place even under pressure.

The sheet in PE Bulk MoS² measures 3000x1250 mm and is gray, which makes it a practical choice for worktops, linings and parts in food environments.

Do you have a specific application in mind? We will help you pick the right one.