Sheet in PVC U 2000x1000 mm transparent
Variants
| Item no. |
|---|
| Loading variants ... |
Sheet in PVC U transparent is a stiff structural sheet in rigid vinyl plastic without plasticizers. It suits tank building, ventilation ducts, fixtures and signs where you need chemical resistance and dimensional stability.
PVC U has a density of 1.44 g/cm³ and takes up to 60 °C continuously. Moisture absorption is low, 0.2 percent at 23 °C and 50 percent relative humidity, so the sheet holds its dimensions steady in damp environments too. The material carries fire rating UL 94 V-0 from 1 mm without flame retardant additives.
PVC U takes acids, bases, salt solutions and most water based chemicals, but not aromatic or chlorinated solvents, ketones or esters. It can be welded with hot air and PVC welding rod, and glued with PVC adhesive. At temperatures below -20 °C the material becomes more brittle.
This sheet is 2000x1000 mm and is supplied in transparent, which suits partition walls, covers and parts in a chemical environment very well.
Request a quote with your exact dimensions and volume.
Technical specifications
Benefits
God motståndskraft mot kemikalier, syror och baser
Låg krypning och minimal formförändring
Lätt att bearbeta med konventionella verktyg
Hög volym- och ytresistivitet
Uppfyller brandklassning V-0 eller bättre
Hög elasticitetsmodul och formstabilitet
Minimal fuktupptagning, dimensionsstabil
Kan sammanfogas genom svetsning
Machining
Sammanfogning med lim
Datorstödd bearbetning
Håltagning med borr
Bearbetning med fräs
Kapning med såg (band-, cirkelsåg)
Skärning av gängor (invändig/utvändig)
Bearbetning i svarv
Sammanfogning genom svetsning (varmgas, spegel, ultraljud)
| Property | Value | Unit | Test standard |
|---|---|---|---|
| Density & Weight | |||
| Density | 1,44 | g/cm³ | ISO 1183 |
| Moisture Absorption | |||
| Moisture absorption (23°C/50% RH) | 0,2 | % | ISO 62 |
| Water Absorption to Saturation | 0,5 | % | ISO 62 |
| Tensile Properties | |||
| Yield Stress | 57 | MPa | ISO 527 |
| Tensile Modulus of Elasticity | 3325 | MPa | ISO 527 |
| Strain at Yield | 4 | % | ISO 527 |
| Tensile Stress at Break | 40 | MPa | ISO 527 |
| Tensile Strain at Break | > 14 | % | ISO 527 |
| Flexural Properties | |||
| Flexural Strength | 90 | MPa | ISO 178 |
| Impact Resistance | |||
| Charpy Notched Impact Strength | 4 | kJ/m² | ISO 179-1eA |
| Hardness | |||
| Shore D Hardness | 82 | Shore D | ISO 868 |
| Temperature Limits | |||
| Max. Continuous Service Temperature | 60 | °C | UL746B |
| Vicat Softening Temperature (VST/B/50) | 75 | °C | ISO 306 |
| Thermal Expansion | |||
| Coefficient of Linear Thermal Expansion | 75 x 10⁻⁶ | 1/K | ISO 11359-2 |
| Insulation Properties | |||
| Dielectric Strength | 39 | kV/mm | IEC 60243-1 |
| Static Dissipation | |||
| Surface Resistivity | > 10¹³ | Ω | EN 61340 |
| Flammability Rating | |||
| Flammability Rating (UL 94) | V-0 from 1 mm | UL 94 | |
| Fire Classification Building (DIN 4102/EN 13501) | B1 per DIN 4102, B-s3,d0 per EN 13501 | ||
Värdena ovan är genomsnitt från statistiska tester som görs löpande. De anges som information och är inte bindande, om inte annat uttryckligen avtalats i ordererkännandet. För batchspecifika värden kan PlastShop tillhandahålla ett EN 10204-2.2-certifikat.
| Chemical | Concentration | Resistance |
|---|---|---|
| 1,4-Dioxan | 100 | |
| 1,4-Dioxan | 100 | |
| Aceton | 100 | |
| Aceton | 100 | |
| Ammoniak | conc. | |
| Ammoniak | conc. | |
| Ammoniumklorid | - | |
| Ammoniumklorid | - | |
| Amylalkohol | - | |
| Amylalkohol | - | |
| Bensen | - | |
| Bensen | - | |
| Bleklösning | 12,5 cl | |
| Bleklösning | 12,5 cl | |
| Borsyra | 100 | |
| Borsyra | 100 | |
| Bromsvätska | - | |
| Bromsvätska | - | |
| Bränsle, aromatfritt | - | |
| Bränsle, aromatfritt | - | |
| Butylacetat | - | |
| Butylacetat | - | |
| Citronsyra | 10 | |
| Citronsyra | 10 | |
| Cyklohexanon | 100 | |
| Cyklohexanon | 100 | |
| Cyklohexen | 100 | |
| Cyklohexen | 100 | |
| Dieselbränsle | - | |
| Dieselbränsle | - | |
| Dietylenoxid | - | |
| Dietylenoxid | - | |
| Eldningsolja | - | |
| Eldningsolja | - | |
| Etanol | 96 | |
| Etanol | 96 | |
| Etylacetat | 100 | |
| Etylacetat | 100 | |
| Etylenklorid | 100 | |
| Etylenklorid | 100 | |
| Fenol, vattenlösning | ca. 9 | |
| Fenol, vattenlösning | ca. 9 | |
| Fluorvätesyra | 40 | |
| Fluorvätesyra | 40 | |
| Formaldehyd, vattenlösning | 40 | |
| Formaldehyd, vattenlösning | 40 | |
| Fosforsyra | 50 | |
| Fosforsyra | 50 | |
| Frostskyddsmedel | - | |
| Frostskyddsmedel | - | |
| Glycerin | 100 | |
| Glycerin | 100 | |
| Glykol | 100 | |
| Glykol | 100 | |
| Heptan | 100 | |
| Heptan | 100 | |
| Isopropylalkohol | 100 | |
| Isopropylalkohol | 100 | |
| Kalciumklorid | - | |
| Kalciumklorid | - | |
| Kaliumhydroxidlösning | 50 | |
| Kaliumhydroxidlösning | 50 | |
| Klor, gas | 100 | |
| Klor, gas | 100 | |
| Klorbensen | 100 | |
| Klorbensen | 100 | |
| Kloroform | - | |
| Kloroform | - | |
| Koldisulfid | 100 | |
| Koldisulfid | 100 | |
| Koltetraklorid | - | |
| Koltetraklorid | - | |
| Kresol | - | |
| Kresol | - | |
| Linolja | - | |
| Linolja | - | |
| Matolja | - | |
| Matolja | - | |
| Merkurokrom | - | |
| Merkurokrom | - | |
| Metanol | 100 | |
| Metanol | 100 | |
| Metylenklorid | 100 | |
| Metylenklorid | 100 | |
| Metyletylketon (MEK) | 100 | |
| Metyletylketon (MEK) | 100 | |
| Mineraloljor (aromatfria) | - | |
| Mineraloljor (aromatfria) | - | |
| Mjölk | - | |
| Mjölk | - | |
| Mjölksyra | 90 | |
| Mjölksyra | 90 | |
| Myrsyra | 10 | |
| Myrsyra | 10 | |
| Natriumhydroxidlösning | 15 | |
| Natriumhydroxidlösning | 15 | |
| Natriumhydroxidlösning | 60 | |
| Natriumhydroxidlösning | 60 | |
| Natriumkarbonat, vattenlösning | - | |
| Natriumkarbonat, vattenlösning | - |
Värdena ovan är genomsnitt från statistiska tester som görs löpande. De anges som information och är inte bindande, om inte annat uttryckligen avtalats i ordererkännandet. För batchspecifika värden kan PlastShop tillhandahålla ett EN 10204-2.2-certifikat.
Showing 100 of 162 chemicals. Download the complete list (PDF)
Documents available for download: