Vibration damper VD15 black

Not sure how many dampers your machine needs, or which size? Get in touch with the weight of the machine and we will work it out together.

The series covers 55 sizes with diameters from 6 to 200 mm, heights from 8 to 100 mm and threads from M3 to M20. The basic rule when sizing is to choose dampers that are compressed a little under the static weight of the machine; only then can the rubber work. A set that is too hard isolates poorly, one that is too soft lets the machine move more than it should. Spread the weight over the number of mounting points and calculate per damper, not per machine.

Vibration Damper VD15 is a rubber damper with a threaded hole as the mount. The damper is fitted between a vibrating machine and its base and breaks the rigid contact; vibrations and structure borne noise that would otherwise travel straight out into frames, floors and nearby equipment are caught in the rubber instead of spreading through the building. The difference is often heard immediately once the dampers are in place; both the noise level and the wear on nearby parts drop.

The threaded hole takes an ordinary machine screw, so you choose the screw length and grade yourself; nothing sticks out of the damper until it is fitted, which makes it easy to handle and to keep in the store. The fasteners are in zinc plated steel and the body in black rubber with a matte surface.