Twin-Wall in PP-H AlphaPlus gray

PP-H AlphaPlus is a nucleated polypropylene homopolymer. AlphaPlus means with an alpha nucleator, an additive that gives a more even crystal structure and better dimensional stability. The material is stiffer than standard PP-H and takes 20 degrees more heat.

The density is 0.91 g/cm³, the tensile modulus 1700 MPa and the yield strength 33 MPa. The elongation at yield is 8 percent and the notched Charpy impact strength 9 kJ/m². Shore D is 72. The temperature range is 0 to +120 °C in short term testing.

The building fire class is B2 and the material is approved for direct food contact. The surface resistivity is very high.

AlphaPlus suits structural parts where stiffness and dimensional stability under load matter more than maximum impact strength. The material is machined like ordinary PP-H.

Thanks to the more even crystal structure the sheets warp less during sawing and milling. Weld with hot air or a welding rod as for standard PP.

This twin-wall sheet in PP-H AlphaPlus is AlphaPlus gray and is supplied in standard format, which suits light structures, guards, screens and signs. This twin-wall sheet in PP-H AlphaPlus in AlphaPlus gray is particularly well suited to light structural boards that are to be screwed or bonded. Contact us if you want this twin-wall sheet in PP-H AlphaPlus in AlphaPlus gray adapted to your needs.

Do you want it cut to size? Add CTS to the cart.